Sticker Install Instructions

Sticker Install Instructions 

Die cut vinyl decals look amazing but can confuse people who are used to just peeling a sticker and slapping it on. Here are some easy steps to get it right the first time. Please install the sticker in a cool temperate  environment, if the environment is too hot or cold the decal will want to stick to the backing paper. Please be gently and take your time peeling and rolling the sticker off the backing paper slowly.

  1. Clean your window or surface with soap and water or alcohol (do not use glass cleaner, it will leave a residue that will prevent the sticker from making a solid bond). 
  2. Carefully peel the two pieces apart, removing the backing and leaving the decal on the clear application sheet. If your decal is sticking to the backing, close the sticker and start again, changing the angle of your peel maneuver. The half that is pulled away at the sharper angle releases the decal. 
  3. Once you have your decal completely on the application sheet, line it up where you want it, using the light adhesive on the application sheet to hold the decal in place. While one hand holds the decal away from the surface, use your free hand to apply the decal by smoothing it onto the surface as you go up. This reduces the chances of bubbles. 
  4. Once you have the decal on, use your finger and firmly press along every surface of the decal through the application sheet.
  5. Peel the application surface off using a very aggressive angle to avoid peeling the sticker back off. If you see the sticker coming off, stop, press it back on, and try again, making that removal angle as high as you can. 

We are not responsible if you damaged the sticker while installing, if you do not feel comfortable doing the install please get a professional to install it. After you install your stickers be sure to tag us on Instagram @brokensociety